Waterlogic water coolers and
Waterlogic Models
Click on images to enlarge
WL2000 Overview
The WL 2000 mains-fed water dispenser, delivers an instant and constant supply of chilled, high quality drinking water.
Because the WL 2000 unlike bottled water coolers, is supplied through the mains, it does away with the problems of storage, lifting heavy water bottles, degradation and sanitisation, not to mention running out.
Features
- Direct chill technology
- Basic water purification by carbon filtration (1 micron)
- Large drip tray (1.4 litres capacity)
- Constant supply of chilled filtered water preset to 5ºC
- Power-on indicator light
Click on images to enlarge
Options
- The WL 2000 is available in the following:
- Colour: Silver/charcoal grey
- Water: Cold only
- Size: Freestanding or table top
- Cup stack unit: Black, white or silver
Machine weight
- WL 2000 freestanding: 22kg
- WL 2000 table top: 20kg
Installation Requirements
To ensure that the Waterlogic machine can be installed quickly and smoothly in your proposed location, each machine will require a 13 amp (240 AC) switched socket which should not be more than one metre from the machine.
Each plumbed water machine needs to be supplied with water from a rising main. Machines cannot be connected to a storage tank water supply. The pipe work should ideally be no more than one metre from the machine although our in-house service team are able to install machines in the majority of locations. Pipe work must be terminated with a 15mm BS1010 stopcock.
WL2000 Technical Specifications 
Click on images to enlarge
WL2500 Overview
The Waterlogic 2500 water dispenser, delivers an instant and constant supply of the highest quality drinking water. It also comes in a choice of water variants and can provide chilled and instant hot water through the same dispenser. This enables hot drinks to be made without wasting time waiting for kettles to boil.
Because the Waterlogic 2500, unlike bottled water coolers, is supplied through the mains, it does away with the problems of storage, lifting heavy water bottles, degradation and sanitisation, not to mention running out.
Features
- 2 stage purification process including ultraviolet technology (guarantees water within EU guidelines)
- Constant supply of chilled filtered water adjustable 3ºC to 12ºC
- Instant hot water adjustable up to 95ºC with safety features: hot and cold models
- Extra hot facility to boost temperature: hot and cold model
- Hot water indicator light: hot and cold model
- Large drip tray
Click on images to enlarge
Options
- The Waterlogic 2500 is available in the following:
- Colour: White/Grey
- Water: Hot and Cold or Cold only
- Size: Freestanding or table top
Machine weight
- WL 2500 freestanding: hot and cold 30kg
- WL 2500 freestanding: cold only 28kg
- WL 2500 table top: hot and cold 23kg
- WL 2500 table top: cold only 22kg
Installation Requirements
To ensure that the Waterlogic machine can be installed quickly and smoothly in your proposed location, each machine will require a 13 amp (240 AC) switched socket which should not be more than one metre from the machine.
Each plumbed water machine needs to be supplied with water from a rising main. Machines cannot be connected to a storage tank water supply. The pipe work should ideally be no more than one metre from the machine although our in-house service team are able to install machines in the majority of locations. Pipe work must be terminated with a 15mm BS1010 stopcock.
Click on images to enlarge
WATERLOGIC 4 Overview
Combining functionality with sleek, intuitive design, the Waterlogic 4 provides dramatically advanced water purification capabilities alongside unrivalled aesthetics.
The Waterlogic signature approach to refreshment purity takes three stages; Carbon Filtration, UV Purification and BioCote® antimicrobial protection and gives the re-assurance of total hygiene both inside and out. The Waterlogic 4 also breaks new ground in that all cold and sparkling water has the maximum Class A UV treatment, giving the purest water.
Features
- 2 stage carbon filtration
- HC2P technology
- Class A UV
- Firewall technology
- Drip tray sensor
- BioCote® antimicrobial protection
Click on images to enlarge
Options
The Waterlogic 4 is available in the following:
- Hot, cold and sparkling
- Hot and cold
- Cold and sparkling
- Cold only
Machine weight
- Hot, cold and sparkling: 35kg
- Hot and cold: 27kg
- Cold and sparkling: 34kg
- Cold only: 26kg
Installation Requirements
To ensure that the Waterlogic machine can be installed quickly and smoothly in your proposed location, each machine will require a 13 amp (240 AC) switched socket which should not be more than one metre from the machine.
Each plumbed water machine needs to be supplied with water from a rising main. Machines cannot be connected to a storage tank water supply. The pipe work should ideally be no more than one metre from the machine although our in-house service team are able to install machines in the majority of locations. Pipe work must be terminated with a 15mm BS1010 stopcock.
